MEASUREMENTS TO MIND (M2M) is a growing suite of Stevens products that embraces cloud-computing with an all-inclusive vision of shortening the communication path from the sensors to data on-line. That is, what the sensors MEASURE the MIND sees.
Part # 90043, 44903
Part # 90043
A shaft encoder is an electro-mechanical device used to convert the angular position of a shaft or axle to an analog or digital electrical signal. These devices are used in many applications including liquid level measurement. Part of the mechanical aspect of this device for level measurement utilizes a float and counter-weight attached to a line or tape placed around a pulley attached to the encoder’s shaft.
As the level changes, the float moves up and down and, thereby, rotating the pulley and the attached shaft – generating an electronic wave form for both rotating direction and amount. By converting shaft rotation into electronic signals, encoders are used to electronically monitor the position of a rotating shaft. There are two main types of encoders for liquid level measurements are absolute and incremental.
Absolute encoders provide a binary “word” for each position. Each bit requires a separate optical channel. The resolution is equal to the number of output bits. Absolute encoders constantly retain the correct position for one revolution. Therefore, the main advantage is that the output signal is not affected by a power shut-off. When power returns the encoder recognizes what position it is in based on the voltage measurement reference. Whereas incremental measurements rely on a referenced position pointer. Therefore, if power is shut off to an incremental encoder, the reference is lost and incremental pointer resets to zero.
Incremental (relative) encoders provide a contact or pulse for each increment of shaft movement. Usually this consists of two optical quadrature channels to enable the determination of the direction of rotation. The incremental encoder has a lower cost than the absolute encoder due to the limited number of channels, and the encoded position is not limited in revolutions.
Part # 44903
The A/F Shaft Encoder is a low-torque incremental optical sensor that measures water level and provides a digital output.