Tip: if you're looking for drivers, manuals, or other technical support resources, search in the Stevens support site instead.

Cellular

GOES

900MHz

Teledesign TS4000 900MHz UHF/VHF

eTracker
True cloud-based sensor configuration, logging, reporting and data analysis all-in-one.

Bluetooth

Shark (RS232/RS485 Bluetooth Serial Adapter)

Software

Stevens-Connect
A cloud-based interface to configure hardware, visualize data, analyze measurements, manage alarms, calculations, and set up data routing.


MEASUREMENTS TO MIND (M2M) is a growing suite of Stevens products that embraces cloud-computing with an all-inclusive vision of shortening the communication path from the sensors to data on-line. That is, what the sensors MEASURE the MIND sees.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

Power

SOLO (smart SDI-12 power manager)
JL-2 (solar charge controller)
Batteries
Power Supplies
Solar Panels

SOLO
Smart SDI-12 power manager that also provides remote power cycling.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


Met One 024A

Wind direction sensor

Part # 51083

024A wind sensor

The Met One 024A wind direction sensor provides azimuth data for use in micrometeorological measurements related to operational studies and research. This sensor is especially useful when a low starting threshold, a high damping ratio or a short delay distance is required. (For example, in making Paquill determinations or for use with sigma computers, both a high damping ratio and a short delay distance are mandatory performance criteria.)

The 024A is presently employed in continuous service in environments ranging from Antarctic cold to arid desert regions.

  • Precision wire-wound potentiometer
  • Built-in alignment and calibration fixture
  • Digital or analog measurement ability
  • Aluminum or Lexan cups available

Shop Online

What's the Easiest and Quickest Way to Start Collecting Data and Access it Anywhere?

The Answer's in the Cloud.

eTracker is a cellular modem and "virtual" cloud-based data logger in one (meaning you don't need to install a separate data logger). Simply connect your sensor and a power source to eTracker and you're done. Configure (or reconfigure) anytime from any Internet-connected device, and use Stevens-Connect to retrieve your data, or forward it to your favorite software system.

Technical Specifications

Accuracy

±3°

Linearity

±1/2% of full scale

Threshold

0.5 mph

Azimuth

Electrical: 0 - 357°
Mechanical: 0 - 360°
0 - 540° with appropriate translator

Temperature Range

-50°C to +65°C

Power Requirements

12 VDC at 10 mA, 12 VDC at 350 mA for heater

Output Signal

0 - 2.5 V, or 0 - 5 V