Tip: if you're looking for drivers, manuals, or other technical support resources, search in the Stevens support site instead.

Cellular

GOES

900MHz

Teledesign TS4000 900MHz UHF/VHF

eTracker
True cloud-based sensor configuration, logging, reporting and data analysis all-in-one.

Bluetooth

Shark (RS232/RS485 Bluetooth Serial Adapter)

Software

Stevens-Connect
A cloud-based interface to configure hardware, visualize data, analyze measurements, manage alarms, calculations, and set up data routing.


MEASUREMENTS TO MIND (M2M) is a growing suite of Stevens products that embraces cloud-computing with an all-inclusive vision of shortening the communication path from the sensors to data on-line. That is, what the sensors MEASURE the MIND sees.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

Power

SOLO (smart SDI-12 power manager)
JL-2 (solar charge controller)
Batteries
Power Supplies
Solar Panels

SOLO
Smart SDI-12 power manager that also provides remote power cycling.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


Met One 092

Barometric pressure sensor

Part # 51123

092 barometric pressure sensor

Barometric pressure sensors convert absolute atmospheric pressure into a linear, proportional voltage, which may be used in any meteorological program. The Met One 092 barometric pressure sensor brings in modern digital computer technology. An on-board CPU scales pressure measurements, provides temperature compensation and controls communications output.

This sensor is inherently stable and does not require periodic service or routine recalibration.

The enclosure houses a solid state pressure transducer, with linearization and amplification electronics along with a low power embedded CPU. The sensor is contained within a small polycarbonate enclosure, and may be mounted outside or inside a building or other enclosure. Small inlet holes allow the atmospheric pressure access to the sensing element.

  • Compact size
  • Weatherproof enclosure
  • Digital and analog outputs
  • Permanent calibration; no service required
  • Customer configured output

Shop Online

What's the Easiest and Quickest Way to Start Collecting Data and Access it Anywhere?

The Answer's in the Cloud.

eTracker is a cellular modem and "virtual" cloud-based data logger in one (meaning you don't need to install a separate data logger). Simply connect your sensor and a power source to eTracker and you're done. Configure (or reconfigure) anytime from any Internet-connected device, and use Stevens-Connect to retrieve your data, or forward it to your favorite software system.

Technical Specifications

General

Range

600 to 1100 hPa (17.72 to 32.48 inch/hg)

Elevation

Sea level to 10,000 ft. (3048 m)

Resolution

0.1 hPa

Temp. operating range

-40°C to 55°C (-40°F to 131°F)

Temp. compensated range

-40°C to 55°C (-40°F to 131°F)

Accuracy

±0.35 hPa @ 20°C (68°F)

Long Term Stability:

±1.0 hPa (±0.03 in Hg) over full range or ±0.5 hPa over any 200 hPa range
±1.0 hPa in 1 year

Electrical

Analog output

0-1, 0-2, 0-2.5 or 0-5 VDC
(Analog output automatically adjusts from zero to full scale for range selected.)

Digital output

RS-232, RS-485 & SDI-12

Digital protocol

ASCII Terminal Mode
RTU for RS-232 and RS-485.

Baud rates

1200, 2400, 4800, 9600, & 19.2K

Power requirement

10 mA @ 12 VDC, typical

Power range

6-16 VDC

Physical

Weight

8.8 oz. (250 g)

Dimensions

4.72 x 3.14 x 2.16 in (120 x 80 x 55 mm)