Tip: if you're looking for drivers, manuals, or other technical support resources, search in the Stevens support site instead.




Teledesign TS4000 900MHz UHF/VHF

True cloud-based sensor configuration, logging, reporting and data analysis all-in-one.


Shark (RS232/RS485 Bluetooth Serial Adapter)


A cloud-based interface to configure hardware, visualize data, analyze measurements, manage alarms, calculations, and set up data routing.

MEASUREMENTS TO MIND (M2M) is a growing suite of Stevens products that embraces cloud-computing with an all-inclusive vision of shortening the communication path from the sensors to data on-line. That is, what the sensors MEASURE the MIND sees.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


SOLO (smart SDI-12 power manager)
JL-2 (solar charge controller)
Power Supplies
Solar Panels

Smart SDI-12 power manager that also provides remote power cycling.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

Tipping Bucket Rain Gage

Part # 48195

rain gage

The tipping bucket rain gage is recognized as the standard for measuring rainfall and other precipitation in remote and unattended locations.

The integrated siphon mechanism delivers high levels of accuracy across a broad range of rainfall intensities. Each unit consists of a collector funnel with stainless steel leaf filter, an integrated siphon control mechanism, an outer enclosure with quick release fasteners, and base which houses the tipping bucket mechanism. The unit includes dual output reed switches with varistor protection (helps shield sensitive components against excessive transient voltage) as well as dual rainfall discharge outlets for water collection and/or analysis.

The bucket tips when precipitation of 0.01", 0.2 mm, 0.5 mm or 1.0 mm has been collected. Each tip activates a reed switch closure which is detected by a data logger and/or telemetry system.

It's also available with a larger collector measuring 11.1" (282.8 mm) in diameter.

Shop Online

What's the Easiest and Quickest Way to Start Collecting Data and Access it Anywhere?

The Answer's in the Cloud.

eTracker is a cellular modem and "virtual" cloud-based data logger in one (meaning you don't need to install a separate data logger). Simply connect your sensor and a power source to eTracker and you're done. Configure (or reconfigure) anytime from any Internet-connected device, and use Stevens-Connect to retrieve your data, or forward it to your favorite software system.

Technical Specifications


200 mm (8 inch) or 282.8 mm (11.1 inch) diameter with machined aluminum rim


One tip at 0.2, 0.5, 1.0 mm or 0.01 inch


Range: 0-700 mm/hour
Accuracy: ± 2% 25-500 mm/hour, ± 1 tip from 1-25 mm/hour


Tipping bucket with siphon


0.4mm capacity of rainfall - made from brass with a non-hygroscopic outer body


Type: dual reed-switch (make contact), momentary
Rating:12 VA (0.5 amp max)
Duration: 0.1 second

Physical dimensions

Height x diameter: 342 mm (13.5") x 229 mm 9"
Weight: 3 kg (6.6 lbs)


Chrome plated, injected moulded non-hygroscopic ABS balanced ± 0.05 gms


Die-cast aluminium

Mounting holes

Three (3) 10mm diameter mounting holes

Drain fittings

Able to attach 12 mm inside diameter tubing, to catch rainfall after passing through buckets


Ground sapphire pivots with stainless steel shaft

Insect covers

Stainless steel mesh on all openings to prevent insects from entering gauge

Outer enclosure

Keyed to enable the release of the outer enclosure without the need for the removal of the three securing screws