Tip: if you're looking for drivers, manuals, or other technical support resources, search in the Stevens support site instead.




Teledesign TS4000 900MHz UHF/VHF

True cloud-based sensor configuration, logging, reporting and data analysis all-in-one.


Shark (RS232/RS485 Bluetooth Serial Adapter)


A cloud-based interface to configure hardware, visualize data, analyze measurements, manage alarms, calculations, and set up data routing.

MEASUREMENTS TO MIND (M2M) is a growing suite of Stevens products that embraces cloud-computing with an all-inclusive vision of shortening the communication path from the sensors to data on-line. That is, what the sensors MEASURE the MIND sees.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.


SOLO (smart SDI-12 power manager)
JL-2 (solar charge controller)
Power Supplies
Solar Panels

Smart SDI-12 power manager that also provides remote power cycling.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

The product finder lets you explore our catalog visually and filter products by type of monitoring, manufacturer, and more.

Stevens GroPoint Profile

Multi-Segment Soil Moisture Profiling Probe

gropoint profile moisture sensor

The Stevens GroPoint Profile provides cost-effective measurement of volumetric water content over multiple depths using a single probe, eliminating the cumbersome excavation required for multiple sensors placed at different depths. It can be deployed in irrigation-sensitive zones to enable full control of precision irrigation needs, providing an understanding of water movement through the soil.

The sleek, lightweight design installs quickly with minimal soil disruption using a pilot rod and slide hammer tool. Designed for vertical installation, the sensor takes measurements over multiple soil layers, with each measurement zone (segment) providing the average volumetric soil moisture content over a 15 cm range (approximately 6 inches).

An Accurate and Cost-Effective Soil Profiling Solution

Eliminates need for multiple sensors and cabling systems.

Installs quickly and easily without excavating.

One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.

Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.

Low power requirements—suitable for remote, autonomous applications.

Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.

Fully potted electronics for excellent durability.

Simplify Measurement of Soil Moisture at Multiple Depths

This single GroPoint Profile probe installed without excavation is equivalent to 4 separate probes. It will measure soil moisture at 4 different depths.

My Image

Segment 1

Average volumetric soil moisture content measured over 15cm (5.9”)

My Image

Segment 2

My Image

Segment 3

My Image

Segment 4





the soil.


Create a pilot hole the exact size required for the probe using the slide hammer tool attached to a sturdy steel pilot rod. This makes installation quick and easy, and provides minimum soil disruption, further increasing measurement accuracy.

Slide hammer
Pilot rod






Choose the number of segments that’s right for your application.

(Custom sizes also available)


GroPoint™ sensors are based on the field-proven Time Domain Transmission (TDT) method for reliably measuring changes in soil moisture. Like Time Domain Reflectometry (TDR), TDT also characterizes the time of travel of an electromagnetic signal through soil, but instead of being reflected, the signal propagates around a set path length. The high frequency and helical wave guide provides stability and precision to the measurements.

TDT5 enhances TDT in 5 key ways:

1. Track changes in soil water content

A patented design weaves the antenna through the circuit board 20 times per centimetre, and much like a coiled spring the effective length of the antenna is 5 times the physical length it consumes. It's like having a 75cm long antenna in a single 15cm sensor. A larger antenna increases the resolution of each sample, allowing more noise to be filtered out, improving the accuracy.

2. Reduced manufacturing costs

Unlike other moisture probes, Gropoint sensors do not have separate components for electronics and bulky metal antennas. By integrating the antenna and all electronics into the same circuit board (possible thanks to the patented antenna design), manufacturing costs are dramatically reduced.

3. Engineered precision

Each time a measurement is taken, GroPoint sends 400,000 pulses through the sensing element to generate data for the measurement, then employs advanced filtering to eliminate outlying readings (noise) before averaging the data and sending the measurement as SDI-12 output. This ensures measurement stability which accurately tracks changes in soil moisture.

4. Low power consumption

Despite 400,000 pulses for each measurement, the total time to take the measurement is less than 100 ms. This means that power consumption is minimal, and that permits GroPoint sensors to be operated for many months with small 9V battery-powered data loggers.

5. Maximum durability

Unlike typical sensors, the antenna is not exposed to the soil, so there's nothing to bend or break. The entire sensor circuit board is sealed in epoxy then encased in a sealed polycarbonate housing.

Request Quote

What's the Easiest and Quickest Way to Start Collecting Data and Access it Anywhere?

The Answer's in the Cloud.

eTracker is a cellular modem and "virtual" cloud-based data logger in one (meaning you don't need to install a separate data logger). Simply connect your sensor and a power source to eTracker and you're done. Configure (or reconfigure) anytime from any Internet-connected device, and use Stevens-Connect to retrieve your data, or forward it to your favorite software system.

Technical Specifications


Measurement range

7% to 42% of VMC for most soils

Output unit

Volumetric percent


< 0.2%


Measurement range

-20°C to +70°C (-4°F to 158°F)

Storage temperature

-40°C to 85°C (-40°F to 185°F)





SDI-12 V1.3


Bare wire (optional 4 pin, IP66/IP68 rated environmental connector)

Input voltage

6 to 14 VDC max. 18 VDC

Current consumption

Quiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS

Warm-up time on power up

< 1 second



Each segment is approximately 15 cm (5.9") long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.

Probe weight

2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)

Cable weight

38 g per m (0.42 oz. per foot)

Standard cable

5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial


1-year limited parts and labour