Cell-Net

Reliable, 2-way cellular modem that’s easy to set up.

Part # 93950

  • More

    Power input

    Close
  • More

    USB (allows connection to computer for configuration changes instead of via cell connection)

    Close
  • More

    Standard RS-232 serial port (connect to logger or smart sensor)

    Close
  • More

    Status LEDs

    Close
  • More

    GPS antenna connector

    Close
  • More

    Cellular antenna

    Close

Stevens' MEASUREMENTS TO MIND strategy maximizes reliability of your remote monitoring network and makes it simple to connect your station directly to the cloud.

M2M

Cell-Net is a simple cellular telemetry solution for new or existing remote monitoring stations. Cell-Net offers a web-based configuration utility that makes it easy to install and configure forwarding of remote data to any destination.

Unlike typical cellular modems which have a constant high power draw, Cell-Net operates almost entirely in an ultra-low power mode yet still provides the benefits of 2-way communications, and optimizes successful transport of data for maximum reliability.

  • Designed specifically for easy configuration and provisioning for remote sites that are costly to visit.
  • Approximately 20X typical improvement in power consumption vs. typical cellular telemetry.
  • Provides the benefits of a 2-way connection without high power consumption.
  • Data transmission via FTP, HTTP protocols (or both simultaneously) or IP protocol.
  • Intelligent data management, data buffering, and network verification to ensure successful transmission of critical data.
  • Can be used with your choice of cellular carriers (3G GSM or 3G CDMA).
  • Integrated GPS for time, longitude and latitude.
  • Perfect for any application, monitoring any parameters.

Unique Features

  • Easy configuration: Configure via the web-based portal or by connecting to a PC and using an intuitively designed Windows program. No custom programming or scripts required.
  • Smart power management: Cell-Net features an ultra-low-power mode that consumes just 1.6mA at idle (that’s less than 1% of a typical cell modem). When transmitting, power draw is similar to other modems, but this is only for very short periods at user-controlled transmission intervals.
  • Data management: Cell-Net will listen for a connected logger or smart sensor to receive data in the buffer before transmitting. Once received, data can either be transmitted immediately, or after the buffer exceeds a defined size, or transmitted based on a user-defined interval.
  • Redundancy: Data is transmitted for current reporting cycle and the last reporting cycle.
  • Reliability: Cell-Net verifies connection with cell network and HTTP server connection before data is sent. If no connection is available or if data reception is not confirmed, data is saved and sent the next scheduled transmission.
  • Data flexibility: Forward your data to any destination to access with any software platform, like Aquarius or our own cloud-based Stevens-Connect.
  • Connect directly to the cloud: Provides direct IP connectivity to data loggers and smart sensors through a standard RS-232 serial port. No other interface hardware required.
  • Predict and prevent problems: In addition to internal diagnostics, station and transmission health and performance data can be included in each transmission.

Up to 20x better power efficiency vs. typical cellular modems.

The key to the extreme power efficiency of Cell-Net is its “hybrid” approach to 2-way communications. Not only does it consume less power than typical cell modems when in standard 2-way communications mode, but it also offers an ultra-low power mode that sacrifices some responsiveness in two-way connectivity for an extremely low power consumption that makes it suitable for remote stations monitoring critical data.

show

 

Cell-Net

Typical cellular modems

show

Full 2-way communication mode

On demand

Always

show

Power consumption at idle

150 mA

220 mA

show

Ultra-low power mode

show

Power consumption at idle

1.6 mA

N/A

show

Transmit new data

On schedule or when triggered

N/A

show

Download new configuration data

On schedule or when triggered

N/A

SIMPLE.

Just add a data logger or smart sensors and go. Configure the station and access insightful information—not just data—any time from any device via the cloud software.

FLEXIBLE.

Any sensors. Any type of system. Any application.

RELIABLE.

Smart data verification, redundancy and status reporting built in. Unheard-of power efficiencies and 2-way communication for inexpensive remote station access and control.

Dead simple setup and configuration.

Anytime, anywhere, any device.

All configuration and programming of the remote Cell-Net is done online via a web-based management portal. Setup in 3 steps:

1

Connect to data logger / smart sensor(s)

2

Connect to power source

3

Configure data handling (frequency, redundancy, destination) with a simple online GUI


Technical Specifications

Current consumption

Listen/trigger mode/idle

1.6 mA

Data receive/store/prepare for transmission

150 mA

Data transmit

250 mA

Power

Input voltage

10 to 18 VDC

TX output power

24.3 dBm (270 mW)

Physical

Dimensions

1 3/8” (3.5 cm) x 5 1/8” (13 cm) x 3 3/4” (9.7 cm)

Weight

10.78 oz (305.6 g)

Environmental

Operating temperature

-30°C to 65°C (SIM Card selection may limit this range for GSM version)

Storage temperature

-40°C to 85°C (SIM Card selection may limit this range for GSM version)

LEDs

Power

Indicates power to the unit

GPS

Indicates if GPS does not have location fix

Cell

Indicates if there is a connection to the tower

BIST

Built-in self test

Ports

Communication with data logger/smart sensors

RS-232

Communication with PC

USB B

Cellular antenna

SMA

GPS antenna

SMA

Included

Power cable with flying leads, dipole dual-band cellular 800/1900 MHz antenna, USB cable.